Printing Pattern 6

1
3 2
6 5 4
10 9 8 7

Outer Loop : 4 Times

Inner Loop: depend on value of Outer Loop

Value in each line is maximum that line should print in reverse order

1
2 3
4 5 6
7 8 9 10

If each line is above is reversed we get desired pattern

We must start with a maximum value of the line and then it should then be decremented.
What is the maximum value for the line?
Looking at the pattern --
Maximum value        line no.             Value of i + previous Max value
1                                    1                              1+ 0 = 1
3                                    2                              1+ 2 =3
6                                    3                              3+ 3 =6
10                                  4                              4+ 6 =10

#include<stdio.h>
int main()
{
    int i,j,max_val,print_val;

    max_val=0;
    for(i=1;i<=4;i++)
    {
        max_val=max_val+i;
        print_val=max_val;
        for(j=1;j<=i;j++)
        {
            printf("%d ",print_val);
            print_val--;
        }
        printf("\n");
    }
    return 0;
}

Printing pattern-5

1
23
456
78910

This pattern is very much similar to the pattern which is earlier discussed.

Outer Loop controls no. of lines to be printed which are 4.
Inner Loop controls the digits printed in each line.
In line no.1 we have only 1 digit printed.
In line no.2 we have 2 digits printed.
and so on.
Next digit is increment of previous digits, so we take a counter to keep count of next digit to be printed.

Outer Loop
for(i=1;i<=4;i++)

Inner Loop
for(j=1;j<=i;j++)

#include<stdio.h>
int main()
{
       int i,j count;
       count=1;

       for(i=1;i<=4;i++)
      {
             for(j=1;j<=i;j++)
            {
                   printf("%d",count);
                   count++;
            }
            printf("\n");
      }
   return 0;
 }

Printing Pattern 4( 2 Right angle triangles )

*
**
***
****
***
**
*

The pattern can seen as two right angle triangles previously discussed in  the blog.
Outer loop ( for no. of lines:7) will loop 7 times.
Inner loop should 1st increase the no. of * in pattern up till 4 lines and then decrease them.

Outer loop
for(i=1;i<=7;i++)

1st Inner loop (increasing stars upto line no.4)
  for(j=1;j<=i;j++)
                 printf("*");
For 1st loop (i=1)
j=1 , j<= i yes print *
newline

For 2nd loop(i=2)
j=1, j<=i yes print *
j=2, j<=i yes print *
newline
and so on for i= 3 and 4 prints *** and ****

 2nd Inner loop(decreasing stars after line no.4)
 for(j=i;j<=7;j++)
                 printf("*");

For 5th loop (i=5)
j=5(i) , j<= 7 yes print *
j=6(i+1) , j<= 7 yes print *
j=7(i+2),  j<=7 yes print *
newline 

For 6th loop(i=6)
j=6(i), j<=7 yes print *
j=2(i+1), j<=7 yes print *
newline 

for 7th loop (i=7)
j=7(i) , j<=7 yes print *
newline

An  if else loop to check the line no.
 if(i<=4)
{
1st Inner loop
}
else
{
2nd Inner loop
}
 
#include<stdio.h>
int main()
{
for(i=1;i<=7;i++)
     {
        if(i<=4)
        {
           for(j=1;j<=i;j++)
                 printf("*");
        }

        else
       {
           for(j=i;j<=7;j++)
                 printf("*");
        }

    printf("\n");
  }
  return 0;

}

Printing Pattern 3

      4
    34
  234
1234



For this pattern we have to take care about three things

1. We need to print 4 lines
2. We need to print required spaces in lines
3. We need to print the values.

The pattern requires three loops

1. An outer loop to loop 4 times.
2. An inner loop to control the no. of spaces needed to be printed in each line.
3. An inner loop to print certain after spaces in each line.

In line no.1 we need to print 3 spaces and value is 4
In line no.2 we need to print 2 spaces and value 3 and 4.

So we see that no. of spaces in each line decrease and finally become zero.
The number of digits in each line increases.
we can also see that spaces + digits in each line are 4 and remain 4 for all the lines

Line No.             No. of Spaces         No. of Values
1                                    3                           1                       (3+1=4)
2                                    2                           2                       (2+2=4)
3                                    1                           3                       (3+1=4)
4                                    0                           4                       (4+0=4)


Outer loop variable i should iterate 4 times. As we need first digit in first line 4 we can start i=4 and then decrement it and make j dependent on i. (although the same pattern can be printed in number of ways)
for(i=4;i>=1;i--)

first inner loop is controlling the number of spaces in each line. Its number of times it iterates should reduces. As we noted that no. of digits + no. of spaces is constant = 4 for this pattern, we can make this loop dependent on i also. As i starts from 4 and number of spaces should be 3 for 1st line space =4-1 each time and decrement till 1 or the other way start from 1 and go upto i-1. For line 2 i's value will become 3 and 3-1 will become 2 and we need tw spaces to be printed as desired.
for(j=i-1;j>=1;j--)
printf(" ");

for printing value we need a another loop. For first line this loop shall only print 4. Then for second line it should print 3 and 4. We can recognize that this loop starts from i's value and go till 4 for each line because each line is printing as its last value.
for(k=i;k<=4;k++)
printf("%d",&k);

#include<stdio.h>

int main()
{
       int i, j, k;
      
       for(i=4;i>=1;i--)
       {
               for(j=i-1;j>=1;j--)
                    {
                          printf(" ");
                     }
              
               for(k=i;k<=4;k++)
                     {
                          printf("%d",k);
                      }
     
              printf("\n");
       }
        
        return 0;
     
}

 

Printing Pattern-2 (upside down right angle triangle)

1234
123
12
1

Outer loop 4 times
Inner loop decrements

#include<stdio.h>
int main()
{

int i, j;

for(i=4:i<=1;i--)
{
           for(j=1;j<=i;j++)
           {
              printf("%d", j);
           }
         printf("\n");
}

return 0;
}

Try the following pattern

4321
432
43
4

Outer loop 4 times
inner loop j=4 and decrement to 1 ( for line no.1 , to 2 for line no.2 and so on. Line no. depend on outer loop variable i)

Printing Pattern-1( Right Angle Triangle 1)

Printing pattern involve using several number of loop. Very basic pattern require two nested for loops.
The outer loop iterates to the number of lines in the pattern.
The inner loop controls the printing of pattern occurring in single line.

Patterns become simple if we relate them to loop number
*
**
***
****
In above pattern,
Line 1 has 1 *
Line 2 has two *
And similarly the pattern remains the same.

Looking at above pattern i can also say

• It prints 4 lines, so outer loop should count to value of 4.
• Inner loop is responsible for printing *.
• Inner loop is dependent on outer loop in a way. 
• If Line no. is 1 (line no. depends on outer loop) then inner loop should loop once and print * once
• If Line no. is 2 then inner loop should run twice print ** and so on.

Setting up two loops

need i to print 4 lines and line number 1 to 4
for(i=1;i<=4;i++)

need j to be less than or equal to i's current value i.e if i=2 then j should be 1 and 2 , first printing * (for j=1) and * (for j=2) (total two times) for line no 2
for(j=1; j<=i;j++)
print("*");

after everything is done for that line i.e go to the next line - use \n newline
printf("\n");

 #include<stdio.h>
int main()
{
int i,j;

for(i=1;i<=4;i++)
   {
             for(j=1;j<=i;j++)
            {
                    printf("*");
             }
     printf("\n");
   }
return 0;
}

Try Printing
1
12
123
1234

This is very much similar the * pattern that was discussed
Only print value of j instead of printing *.

Formatted Input(scanf) and Output(printf)

scanf() and printf() are the in-built input and output functions in C. They are found in header file <stdio.h>. The f in printf() and scanf() specifies formatted input and output in which we can specify the format - width justification and precision as to where and how the output should be printed on the console.


Format Specifiers
Integer
short signed %d or %l
short unsigned %u
int %d
long signed %ld
long unsigned %lu
unsigned hexadecimal %x
unsigned octal %o

Real
float %f
double %lf
long double %Lf

Character
signed, unsigned char %c

String
%s




Width & Justification
If given number itself require more columns than specified than width value is ignored. If specified value of width is greater, blanks are padded in left side of the value to be printed.
%d - print an integer, 1 column wide.
 %2d -  print an integer, 2 columns wide
%nd - print an integer, n columns wide

%-nd - print an integer, n columns wide padding cells in right side of the value to be printed.

Precision
Precision value is used when we want a result to having values specifying the result having floating point upto certain number of digits.

a float (%f) originally shows 6 digits of precision
Suppose we want our output to show less digits.
%6.3f - specifies 6 columns wide real value with 3 digits after decimal point. Rest of digits after decimal point will be truncated.
 
Excape Sequence
Certain defined characters following backslash '\' are excape sequences that convey a special meaning to compiler.

\n - newline
\b - backspace
\' - single quote
\\ - backslash
\t - tab
\r - carriage return
\a - alert
\" - double quotes

\', \" is used because compiler understand anything enclosed in ' ' as a character and anything enclosed in " " as string. They when used without \ convey special meaning. When we have to use them as it is in output, we use backslash with them.
For example
printf("It said , \"I am from Mars.\"");
Output : It said, "I am from Mars."
If we try to print this statement without using \" compiler will give error because it can go crazy with such usage of " ".




Syntax of printf()

printf("Format String including format specifier, justification, precision", list of variable);

For example
int a=200; float b=20.6673;
printf("\nThe Value of Sum =%6d and rate=%4.2f", a,b);
Output

The Value of Sum=   200 and rate=20.66





Syntax of scanf()

scanf("format_specifier",&variable_name);

(&) -the address of operator

&variable_name : return address location ( hexadecimal value) of the variable it precedes

It tells the scanf to store the value input from the keyboard at memory location which variable a corresponds to.

For example
scanf("%d",&a);
stores and integer value in variable a.
 

Right and Left Shift

Right Shift Operator (>>)
The Right shift Operator is represented by (>>) [pointing to direction it shifts the bits]
It requires to operands(on which operator operated). It shifts the bits of operand left to it towards right by places which is specified by the right of the operator.
The blanks created due to shifting are filled by 0s.

Operand to left of (>>) whose bits are shifted >> operand to right of (>>) number of places by which bits are shifted

1010>>3 equals 0001

Significance of Right shift

Lets take 25
Its binary equivalent
25 =  0001 1001
applying right shift
0001 1001>>1 = 0000 1100 = 12
applying a right shift to 12
0000 1100 >>1 = 0000 0110 = 6
applying a right shift to 6
0000 0110 >>1 = 0000 0011 = 3

At each step of right shift, we are actually dividing the given number by 2 (rejecting the decimal part if there is any 25/2 =12.5->we reject 0.5)

Left Shift Operator (<<)
The Left shift Operator is represented by (<<) [pointing to direction it shifts the bits]
It requires to operands(on which operator operated). It shifts the bits of operand left to it towards left by places which is specified by the right of the operator.
For each bit shifted, 0 is added to the right of the number.

0000 1110 << 1 =  0001 1100

Significance of Left Shift

Lets take 3
3 = 0000 0011
applying left shift to 3
0000 0011<<1 = 0000 0110 = 6
applying left shift to 6
0000 0011<<1 = 0000 1100 =12
applying left shift to 12
0000 1100<<1 = 0001 1000 =24

At each step of left shift, we are multiplying the number by 2.

Constants

Constants: the items whose value do not change during program execution.
The constants include Integer, Real and Character constants.

Constant type	Permissible Range
Integer Constant	-2147483648 (231) to 2147483647 (231-1)
Real Constant	-3.4*10­­38­ to 3.4*1038­
Character Constant	Can have maximum length of 1

 Rules for constructing Integer Constants

1. Should have at least one digit.
2. It must not have a decimal point.
3. Can be either positive or negative.
4. If no sign precedes a number, it is taken positive.
5. No commas or blanks are allowed within the Integer Constant.

Valid Integer Constants	Invalid
4284	4,284
-38482	4 285
+42873	792.654

Rules for constructing Real Constants

1. Should have at least one digit. 
2. Must have a decimal point.
3. Can be either positive or negative.
4. Default sign is positive.
5. No commas or blanks allowed.
6. Big real constants can be expressed in exponential form.
7. The mantissa and exponential part is separated by letter e or E.
8. Default sign for mantissa and exponent sign is positive. 

0.000738 = 7.38 * 10^-4

Here 7.38 is the Mantissa part

And 10^-4 is the Exponent part

In exponential form it can be written as

7.38e-4 Or 7.38E-4

Valid Real Constants	Invalid
8912.12	4284
0.1231	4 285 . 06
-2371.001	Five.seven
-0.25	1,000.7
+3.2e5	4.3e
-4.32e-7	2E
3.55E-5	4,009E
-234.01E+6	2 e 21

Rules for constructing Character constant

1.      Must be enclosed without single quotation marks.

2.      Must be of maximum length 1.

3.      Can be a alphabet, a number or a special symbol.

 
Examples : 'A',  '9',  '='